ArticlesQuickstartsAuth0 APIsSDKs
Contact sales Log in
User Consent and Third-Party Applications
Contact sales Log in
Get Started

User Consent and Third-Party Applications

The OIDC-conformant authentication pipeline supports defining resource servers (such as APIs) as entities separate from applications. This lets you decouple APIs from the applications that consume them, and also lets you define third-party applications that allow external parties to securely access protected resources behind your API.

Consent dialog

If a user authenticates through a third-party application and the application requests authorization to access the user's information or perform some action at an API on their behalf, the user will see a consent dialog.

For example, this request:

GET /authorize?
client_id=some_third_party_client
&redirect_uri=https://fabrikam.com/contoso_social
&response_type=token id_token
&__scope=openid profile email read:posts write:posts__
&__audience=https://social.contoso.com__
&nonce=...
&state=...

Was this helpful?

/

Will result in this user consent dialog:

Authorization - User consent and applications - consent-dialog

If the user allows the application's request, this creates a user grant, which represents the user's consent to this combination of application, resource server, and requested scopes. The application then receives a successful authentication response from Auth0 as usual.

Once consent has been given, the user won't see the consent dialog during subsequent logins until consent is revoked explicitly.

Scope descriptions

By default, the consent page will use the scopes' names to prompt for the user's consent. As shown below, you should define scopes using the action:resource_name format.

Authorization - User consent and applications - Consent scopes

The consent page groups scopes for the same resource and displays all actions for that resource in a single line. For example, the configuration above would result in Posts: read and write your posts.

If you would like to display the Description field instead, you can do so by setting the tenant's use_scope_descriptions_for_consent to true. This will affect consent prompts for all of the APIs on that tenant.

To set the use_scope_descriptions_for_consent flag, you will need to make the appropriate call to the API:




  

    
  


  
  

    
      

        
curl --request PATCH \
  --url 'https://{yourDomain}/api/v2/tenants/settings' \
  --header 'authorization: Bearer API2_ACCESS_TOKEN' \
  --header 'cache-control: no-cache' \
  --header 'content-type: application/json' \
  --data '{ "flags": { "use_scope_descriptions_for_consent": true } }'
Was this helpful?
/

      

    
      

        
var client = new RestClient("https://{yourDomain}/api/v2/tenants/settings");
var request = new RestRequest(Method.PATCH);
request.AddHeader("content-type", "application/json");
request.AddHeader("authorization", "Bearer API2_ACCESS_TOKEN");
request.AddHeader("cache-control", "no-cache");
request.AddParameter("application/json", "{ \"flags\": { \"use_scope_descriptions_for_consent\": true } }", ParameterType.RequestBody);
IRestResponse response = client.Execute(request);
Was this helpful?
/

      

    
      

        
package main

import (
	"fmt"
	"strings"
	"net/http"
	"io/ioutil"
)

func main() {

	url := "https://{yourDomain}/api/v2/tenants/settings"

	payload := strings.NewReader("{ \"flags\": { \"use_scope_descriptions_for_consent\": true } }")

	req, _ := http.NewRequest("PATCH", url, payload)

	req.Header.Add("content-type", "application/json")
	req.Header.Add("authorization", "Bearer API2_ACCESS_TOKEN")
	req.Header.Add("cache-control", "no-cache")

	res, _ := http.DefaultClient.Do(req)

	defer res.Body.Close()
	body, _ := ioutil.ReadAll(res.Body)

	fmt.Println(res)
	fmt.Println(string(body))

}
Was this helpful?
/

      

    
      

        
HttpResponse<String> response = Unirest.patch("https://{yourDomain}/api/v2/tenants/settings")
  .header("content-type", "application/json")
  .header("authorization", "Bearer API2_ACCESS_TOKEN")
  .header("cache-control", "no-cache")
  .body("{ \"flags\": { \"use_scope_descriptions_for_consent\": true } }")
  .asString();
Was this helpful?
/

      

    
      

        
var axios = require("axios").default;

var options = {
  method: 'PATCH',
  url: 'https://{yourDomain}/api/v2/tenants/settings',
  headers: {
    'content-type': 'application/json',
    authorization: 'Bearer API2_ACCESS_TOKEN',
    'cache-control': 'no-cache'
  },
  data: {flags: {use_scope_descriptions_for_consent: true}}
};

axios.request(options).then(function (response) {
  console.log(response.data);
}).catch(function (error) {
  console.error(error);
});
Was this helpful?
/

      

    
      

        
#import <Foundation/Foundation.h>

NSDictionary *headers = @{ @"content-type": @"application/json",
                           @"authorization": @"Bearer API2_ACCESS_TOKEN",
                           @"cache-control": @"no-cache" };
NSDictionary *parameters = @{ @"flags": @{ @"use_scope_descriptions_for_consent": @YES } };

NSData *postData = [NSJSONSerialization dataWithJSONObject:parameters options:0 error:nil];

NSMutableURLRequest *request = [NSMutableURLRequest requestWithURL:[NSURL URLWithString:@"https://{yourDomain}/api/v2/tenants/settings"]
                                                       cachePolicy:NSURLRequestUseProtocolCachePolicy
                                                   timeoutInterval:10.0];
[request setHTTPMethod:@"PATCH"];
[request setAllHTTPHeaderFields:headers];
[request setHTTPBody:postData];

NSURLSession *session = [NSURLSession sharedSession];
NSURLSessionDataTask *dataTask = [session dataTaskWithRequest:request
                                            completionHandler:^(NSData *data, NSURLResponse *response, NSError *error) {
                                                if (error) {
                                                    NSLog(@"%@", error);
                                                } else {
                                                    NSHTTPURLResponse *httpResponse = (NSHTTPURLResponse *) response;
                                                    NSLog(@"%@", httpResponse);
                                                }
                                            }];
[dataTask resume];
Was this helpful?
/

      

    
      

        
$curl = curl_init();

curl_setopt_array($curl, [
  CURLOPT_URL => "https://{yourDomain}/api/v2/tenants/settings",
  CURLOPT_RETURNTRANSFER => true,
  CURLOPT_ENCODING => "",
  CURLOPT_MAXREDIRS => 10,
  CURLOPT_TIMEOUT => 30,
  CURLOPT_HTTP_VERSION => CURL_HTTP_VERSION_1_1,
  CURLOPT_CUSTOMREQUEST => "PATCH",
  CURLOPT_POSTFIELDS => "{ \"flags\": { \"use_scope_descriptions_for_consent\": true } }",
  CURLOPT_HTTPHEADER => [
    "authorization: Bearer API2_ACCESS_TOKEN",
    "cache-control: no-cache",
    "content-type: application/json"
  ],
]);

$response = curl_exec($curl);
$err = curl_error($curl);

curl_close($curl);

if ($err) {
  echo "cURL Error #:" . $err;
} else {
  echo $response;
}
Was this helpful?
/

      

    
      

        
import http.client

conn = http.client.HTTPSConnection("")

payload = "{ \"flags\": { \"use_scope_descriptions_for_consent\": true } }"

headers = {
    'content-type': "application/json",
    'authorization': "Bearer API2_ACCESS_TOKEN",
    'cache-control': "no-cache"
    }

conn.request("PATCH", "/{yourDomain}/api/v2/tenants/settings", payload, headers)

res = conn.getresponse()
data = res.read()

print(data.decode("utf-8"))
Was this helpful?
/

      

    
      

        
require 'uri'
require 'net/http'
require 'openssl'

url = URI("https://{yourDomain}/api/v2/tenants/settings")

http = Net::HTTP.new(url.host, url.port)
http.use_ssl = true
http.verify_mode = OpenSSL::SSL::VERIFY_NONE

request = Net::HTTP::Patch.new(url)
request["content-type"] = 'application/json'
request["authorization"] = 'Bearer API2_ACCESS_TOKEN'
request["cache-control"] = 'no-cache'
request.body = "{ \"flags\": { \"use_scope_descriptions_for_consent\": true } }"

response = http.request(request)
puts response.read_body
Was this helpful?
/

      

    
      

        
import Foundation

let headers = [
  "content-type": "application/json",
  "authorization": "Bearer API2_ACCESS_TOKEN",
  "cache-control": "no-cache"
]
let parameters = ["flags": ["use_scope_descriptions_for_consent": true]] as [String : Any]

let postData = JSONSerialization.data(withJSONObject: parameters, options: [])

let request = NSMutableURLRequest(url: NSURL(string: "https://{yourDomain}/api/v2/tenants/settings")! as URL,
                                        cachePolicy: .useProtocolCachePolicy,
                                    timeoutInterval: 10.0)
request.httpMethod = "PATCH"
request.allHTTPHeaderFields = headers
request.httpBody = postData as Data

let session = URLSession.shared
let dataTask = session.dataTask(with: request as URLRequest, completionHandler: { (data, response, error) -> Void in
  if (error != nil) {
    print(error)
  } else {
    let httpResponse = response as? HTTPURLResponse
    print(httpResponse)
  }
})

dataTask.resume()
Was this helpful?
/

      

    
  





Handle rejected permissions
If a user decides to reject consent to the application, they will be redirected to the redirect_uri specified in the request with an access_denied error:
HTTP/1.1 302 Found
Location: https://fabrikam.com/contoso_social#
    error=access_denied
    &state=...
Was this helpful?
/


Skip consent for first-party applications
First-party applications can skip the consent dialog, but only if the API they are trying to access on behalf of the user has the Allow Skipping User Consent option enabled.

    

      

        
User consent and applications

      

      

        
Note that this option only allows verifiable first-party applications to skip consent at the moment. As localhost is never a verifiable first-party (because any malicious application may run on localhost for a user), Auth0 will always display the consent dialog for applications running on localhost regardless of whether they are marked as first-party applications. During development, you can work around this by modifying your /etc/hosts file to add an entry such as the following:
127.0.0.1       myapp.example
Similarly, you cannot skip consent (even for first-party applications) if localhost appears in any domain in the application's Allowed Callback URLs setting (found in Dashboard > Applications > Settings). Make sure to update Allowed Callback URLs and the callback URL you configured in your application to match the updated domain-mapping.

      

    

  
Since third-party applications are assumed to be untrusted, they are not able to skip consent dialogs.
Revoke consent
If a user has provided consent but you would like to revoke it:
  1. Go to Auth0 Dashboard > User Management > Users, and click the user for whom you would like to revoke consent.
  2. Click the Authorized Applications tab,
  3. Click Revoke next to the appropriate application.
Password-based flows
When using the Resource Owner Password Flow, no consent dialog is involved because the user directly provides their password to the application, which is equivalent to granting the application full access to the user's account.
Force users to provide consent
When redirecting to the /authorize endpoint, including the prompt=consent parameter will force users to provide consent, even if they have an existing user grant for the application and requested scopes.
Customize the consent dialog
The consent dialog UI cannot be customized or set to a custom domain.
Learn more
Was this article helpful?
On This Page